Oxidoreductase enzymes: Characteristics, applications, and challenges as a biocatalyst.

Oxidoreductases are enzymes with distinctive characteristics that favor their use in different areas, such as agriculture, environmental management, medicine, and analytical chemistry. Among these enzymes, oxidases, dehydrogenases, peroxidases, and oxygenases are very interesting. Because their substrate diversity, they can be used in different biocatalytic processes by homogeneous and heterogeneous catalysis. Immobilization of these enzymes has favored their use in the solution of different biotechnological problems, with a notable increase in the study and optimization of this technology in the last years. In this review, the main structural and catalytical features of oxidoreductases, their substrate specificity, immobilization, and usage in biocatalytic processes, such as bioconversion, bioremediation, and biosensors obtainment, are presented.

Rational design of biocatalysts based on covalent immobilization of acylase enzymes.

Acylases catalyze the hydrolysis of amide bonds. Penicillin G acylase (PGA) is used for the semi-synthesis of penicillins and cephalosporins. Although protein immobilization increases enzyme stability, the design of immobilized systems is difficult and usually it is empirically performed. We describe a novel application of our strategy for the Rational Design of Immobilized Derivatives (RDID) to produce optimized acylase-based immobilized biocatalysts for enzymatic bioconversion. We studied the covalent immobilization of the porcine kidney aminoacylase-1 onto aldehyde-based supports. Predictions of the RDID1.0 software and the experimental results led to the selection of glyoxyl-Sepharose CL 4B support and pH 10.0. One of the predicted clusters of reactive amino groups generates an enzyme-support configuration with highly accessible active sites, contributing with 82% of the biocatalyst's total activity. For Escherichia coli PGA, the predictions and experimental results show similar maximal amounts of immobilized protein and activity at pH 8.0 and 10.0 on glyoxyl-Sepharose CL 10B. However, thermal stability of the immobilized derivative is higher at pH 10.0 due to an elevated probability of multipoint covalent attachment. In this case, two clusters of amino groups are predicted to be relevant for PGA immobilization in catalytically competent configurations at pH 10.0, showing accessible active sites and contributing with 36% and 44% of the total activity, respectively. Our results support the usefulness of the RDID strategy to model different protein engineering approaches (site-directed mutagenesis or obtainment of fusion proteins) and select the most promising ones, saving time and laboratory work, since the in silico-designed modified proteins could have higher probabilities of success on bioconversion processes.

Modeling and experimental validation of covalent immobilization of Trametes maxima laccase on glyoxyl and MANA-Sepharose CL 4B supports, for the use in bioconversion of residual colorants.

Our novel strategy for the rational design of immobilized derivatives (RDID) is directed to predict the behavior of the protein immobilized derivative before its synthesis, by the usage of mathematic algorithms and bioinformatics tools. However, this approach needs to be validated for each target enzyme. The objective of this work was to validate the RDID strategy for covalent immobilization of the enzyme laccase from Trametes maxima MUCL 44155 on glyoxyl- and monoaminoethyl-N-aminoethyl (MANA)-Sepharose CL 4B supports. Protein surface clusters, more probable configurations of the protein-supports systems at immobilization pHs, immobilized enzyme activity, and protein load were predicted by RDID1.0 software. Afterward, immobilization was performed and predictions were experimentally confirmed. As a result, the laccase-MANA-Sepharose CL 4B immobilized derivative is better than laccase-glyoxyl-Sepharose CL 4B in predicted immobilized derivative activity (63.6% vs. 29.5%). Activity prediction was confirmed by an experimentally expressed enzymatic activity of 68%, using 2,6-dimethoxyphenol as substrate. Experimental maximum protein load matches the estimated value (11.2 ± 1.3 vs. 12.1 protein mg/support mL). The laccase-MANA-Sepharose CL 4B biocatalyst has a high specificity for the acid blue 62 colorant. The results obtained in this work suggest the possibility of using this biocatalyst for wastewater treatment.

Propionate as the preferred carbon source to produce 3-indoleacetic acid in B. subtilis: comparative flux analysis using five carbon sources.

3-Indoleacetic acid (IAA) is a phytohormone that promotes plant root growth, improving the use of nutrients and crop yield and it is been reported that bacteria of the genus Bacillus are capable of producing this phytohormone under various growth conditions. Considering this metabolic capability, in this work, Bacillus subtilis was cultivated in five different carbon sources: glucose, acetate, propionate, citrate and glycerol; and l-tryptophan (Trp) was used as an inducer for the IAA production. Based on the experimental results it was observed that the highest growth rate was achieved using glucose as a carbon source (µ = 0.12 h-1) and the lowest value was for citrate (µ = 0.08 h-1). On the other hand, the highest IAA production was obtained using propionate Yp/s = 0.975 (gIAA gTrp-1) and the lowest was when glucose was the substrate Yp/s = 0.803 (gIAA gTrp-1). In order to explore the metabolism and understand these differences, the experimental data was used to calculate the flux distribution using the genomic-scale metabolic model of Bacillus subtilis. Performing a comparative analysis it is observed that the fluxes towards precursors increase when propionate is the carbon source.

Modeling and Experimental Validation of Algorithms for Maximum Quantity of Protein to be Immobilized on Solid Supports by Electrostatic Adsorption in the Strategy of Rational Design of Immobilized Derivatives.

Protein immobilization by electrostatic adsorption to a support could represent a good option. On the other hand, lysozyme (EC 3.2.1.17) is a little and basic protein. The objective of this work was to test the functionality of the strategy of Rational Design of Immobilized Derivatives for the immobilization by electrostatic adsorption of egg white lysozyme on SP-Sepharose FastFlow support. The RDID1.0 software was used to predict the superficial lysozyme clusters, the electrostatic configuration probability for each cluster, and the theoretical and estimated maximum quantity of protein to be immobilized. In addition, immobilization was performed and the experimental parameter practical maximum quantity of protein to be immobilized and the enzymatic activity of the immobilized derivative were assessed. The estimated maximum quantity of protein to be immobilized (9.49 protein mg/support g) was close to the experimental practical maximum quantity of protein to be immobilized (14.73 ± 0.09 protein mg/support g). The enzymatic activity assay with the chitosan substrate showed the catalytic functionality of the lysozyme-SP-Sepharose immobilized derivative (35.85 ± 3.07 U/support g), which preserved 78% functional activity. The used algorithm to calculate the estimated maximum quantity of protein to be immobilized works for other proteins, porous solid supports and immobilization methods, and this parameter has a high predictive value, useful for obtaining optimum immobilized derivatives. The applied methodology is valid to predict the most probable protein-support configurations and their catalytic competences, which concur with the experimental results. The produced biocatalyst had a high retention of functional activity. This indicates its functionality in enzymatic bioconversion processes.

Optimization of theoretical maximal quantity of cells to immobilize on solid supports in the rational design of immobilized derivatives strategy.

Current worldwide challenges are to increase the food production and decrease the environmental contamination by industrial emissions. For this, bacteria can produce plant growth promoter phytohormones and mediate the bioremediation of sewage by heavy metals removal. We developed a Rational Design of Immobilized Derivatives (RDID) strategy, applicable for protein, spore and cell immobilization and implemented in the RDID1.0 software. In this work, we propose new algorithms to optimize the theoretical maximal quantity of cells to immobilize (tMQCell) on solid supports, implemented in the RDIDCell software. The main modifications to the preexisting algorithms are related to the sphere packing theory and exclusive immobilization on the support surface. We experimentally validated the new tMQCell parameter by electrostatic immobilization of ten microbial strains on AMBERJET® 4200 Cl- porous solid support. All predicted tMQCell match the practical maximal quantity of cells to immobilize with a 10% confidence. The values predicted by the RDIDCell software are more accurate than the values predicted by the RDID1.0 software. 3-indolacetic acid (IAA) production by one bacterial immobilized derivative was higher (~ 2.6 µg IAA-like indoles/108 cells) than that of the cell suspension (1.5 µg IAA-like indoles/108 cells), and higher than the tryptophan amount added as indole precursor. Another bacterial immobilized derivative was more active (22 µg Cr(III)/108 cells) than the resuspended cells (14.5 µg Cr(III)/108 cells) in bioconversion of Cr(VI) to Cr(III). Optimized RDID strategy can be used to synthesize bacterial immobilized derivatives with useful biotechnological applications.

Screening and Immobilization of Interfacial Esterases from Marine Invertebrates as Promising Biocatalyst Derivatives.

Interfacial esterases are useful enzymes in bioconversion and racemic mixture resolution processes. Marine invertebrates are few explored potential sources of these proteins. In this work, aqueous extracts of 41 species of marine invertebrates were screened for esterase, lipase, and phospholipase A activities, being all positive. Five extracts (Stichodactyla helianthus, Condylactis gigantea, Stylocheilus longicauda, Zoanthus pulchellus, and Plexaura homomalla) were selected for their activity values and immobilized on Octyl-Sepharose CL 4B support by interfacial adsorption. The selectivity of this immobilization method for interfacial esterases was evidenced by immobilization percentages ≥ 94% in almost all cases for lipase and phospholipase A activities. Six pharmaceutical-relevant esters (phenylethyl butyrate, ethyl-2-hydroxy-4-phenyl-butanoate, 2-oxyranylmethyl acetate (glycidol acetate), 7-aminocephalosporanic acid, methyl-prostaglandin F2α, and methyl-6-metoxy-α-methyl-2-naphtalen-acetate -naproxen methyl ester-) were bioconverted by at least three of these biocatalysts, with the lowest conversion percentage of 24%. In addition, three biocatalysts were used in the racemic mixture resolution of three previous compounds. The S. helianthus-derived biocatalyst showed the highest enantiomeric ratios for glycidol acetate (2.67, (S)-selective) and naproxen methyl ester (8.32, (R)-selective), and the immobilized extract of S. longicauda was the most resolutive toward the ethyl-2-hydroxy-4-phenyl-butanoate (8.13, (S)-selective). These results indicate the relevance of such marine interfacial esterases as immobilized biocatalysts for the pharmaceutical industry.

Lipase and Phospholipase Activity Methods for Marine Organisms.

Lipases are very important enzymes having a role in fat digestion and lipid metabolism in marine animals, plants, and microorganisms. The methods for measuring lipase and phospholipase activity have been applied in several studies; however, considering that lipases are water-soluble molecules and their substrates are generally water-insoluble molecules, several steps are required for measuring their digestion products. After a general review of the main type of methods used in marine lipase studies, and experimental procedures, a proposal of new or improved methods is described in order to facilitate the lipase activity measurements in marine organisms.

Rational Design Strategy as a Novel Immobilization Methodology Applied to Lipases and Phospholipases.

Immobilization of lipases and phospholipases, mainly on water-insoluble carriers, helps in their economic reusing and in the development of continuous bioprocesses. Design of efficient lipase and phospholipase-immobilized systems is rather a difficult task. A lot of research work has been done in order to optimize immobilization techniques and procedures and to develop efficient immobilized systems. We conceived a new strategy for the rational design of immobilized derivatives (RDID) in favor of the successful synthesis of optimal lipase and phospholipase-immobilized derivatives, aiming the prediction of the immobilized derivative's functionality and the optimization of load studies. The RDID strategy begins with the knowledge of structural and functional features of synthesis components (protein and carrier) and the practical goal of the immobilized product. The RDID strategy was implemented in a software named RDID1.0. The employment of RDID allows selecting the most appropriate way to prepare immobilized derivatives more efficient in enzymatic bioconversion processes and racemic mixture resolution.

Rational design and synthesis of affinity matrices based on proteases immobilized onto cellulose membranes.

Discovery of new protease inhibitors may result in potential therapeutic agents or useful biotechnological tools. Obtainment of these molecules from natural sources requires simple, economic, and highly efficient purification protocols. The aim of this work was the obtainment of affinity matrices by the covalent immobilization of dipeptidyl peptidase IV (DPP-IV) and papain onto cellulose membranes, previously activated with formyl (FCM) or glyoxyl groups (GCM). GCM showed the highest activation grade (10.2 µmol aldehyde/cm2). We implemented our strategy for the rational design of immobilized derivatives (RDID) to optimize the immobilization. pH 9.0 was the optimum for the immobilization through the terminal α-NH2, configuration predicted as catalytically competent. However, our data suggest that protein immobilization may occur via clusters of few reactive groups. DPP-IV-GCM showed the highest maximal immobilized protein load (2.1 µg/cm2), immobilization percentage (91%), and probability of multipoint covalent attachment. The four enzyme-support systems were able to bind at least 80% of the reversible competitive inhibitors bacitracin/cystatin, compared with the available active sites in the immobilized derivatives. Our results show the potentialities of the synthesized matrices for affinity purification of protease inhibitors and confirm the robustness of the RDID strategy to optimize protein immobilization processes with further practical applications.

Plasmodium falciparum M1-aminopeptidase: a promising target for the development of antimalarials.

Malaria is a devastating human parasitic disease that receives enhanced attention due to the emergence of resistance to traditional drugs. Thus, the search for new molecular targets is a major goal. PfAM1 is an aminopeptidase from Plasmodium falciparum, William H. Welch 1897, belonging to the M1 family of metalloproteases, which is a promising target of inhibitors to block the intra-erythrocytic stages of the parasite. Since its identification in 1998, many efforts have been done to validate PfAM1 as an appropriate target of antimalarials. The present work is a critical review of the main structural, functional and kinetic characteristics of PfAM1, as well as a summary of the effects of key inhibitors at molecular and cellular levels. The systematization of experimental results should contribute to a better understanding of the properties of PfAM1 as a target of antimalarials and promote research projects focused on the development of PfAM1 inhibitors.

Un thermostable exo-b-fructosidase inmovilizado por diseño racional / A thermostable exo-b-fructosidase immobilised through rational design

Thermotoga maritima exo-b-fructosidase (BfrA) secreted by a recombinant Pichia pastoris strain was optimall y immobilised on Glyoxyl–Sepharose CL 4B using the Rational Design of Immobilised Derivatives(RDID) strategy. Covalent attachment of the N-glycosylated BfrA on to the activated support at pH 10allowed total recovery of the loaded enzyme and its activity. The immobilisation process caused no variationin the catalytic properties of the enzyme and allowed further enhancement of the thermal stability.Complete inversion of cane sugar (2.04 M) in a batch stirred tank reactor at 60 C was achieved with aproductivity of 22.2 g of substrate hydrolysed/gram of biocatalyst/hour. Half-life of the immobilisedenzyme of 5 days at 60 C was determined in a continuously operated fixed-bed column reactor. Ourresults promote the applicability of the BfrA-immobilised biocatalyst for the complete hydrolysis of concentratedsucrose solutions under industrial conditions, especially at a high reaction temperature(AU)

A thermostable exo-ß-fructosidase immobilised through rational design.

Thermotoga maritima exo-ß-fructosidase (BfrA) secreted by a recombinant Pichia pastoris strain was optimally immobilised on Glyoxyl-Sepharose CL 4B using the Rational Design of Immobilised Derivatives (RDID) strategy. Covalent attachment of the N-glycosylated BfrA onto the activated support at pH 10 allowed total recovery of the loaded enzyme and its activity. The immobilisation process caused no variation in the catalytic properties of the enzyme and allowed further enhancement of the thermal stability. Complete inversion of cane sugar (2.04 M) in a batch stirred tank reactor at 60 °C was achieved with a productivity of 22.2 g of substrate hydrolysed/gram of biocatalyst/hour. Half-life of the immobilised enzyme of 5 days at 60 °C was determined in a continuously operated fixed-bed column reactor. Our results promote the applicability of the BfrA-immobilised biocatalyst for the complete hydrolysis of concentrated sucrose solutions under industrial conditions, especially at a high reaction temperature.

Improved purification and enzymatic properties of a mixture of Sticholysin I and II: isotoxins with hemolytic and phospholipase A(2) activities from the sea anemone Stichodactyla helianthus.

Sticholysin I and Sticholysin II (StI and StII) are two potent hemolysins which form pores in natural and model membranes at nanomolar concentrations. These proteins were purified from the aqueous extract of the sea anemone Stichodactyla helianthus, Ellis 1768, by gel filtration and ionic exchange chromatography. This procedure rendered StI and StII with high purity (purification factors: 36 and 50, respectively) but a low yield of hemolytic activity, HA (<3%). Additionally, these toxins exhibited very low phospholipase activity (10(-3)U/mg of protein). In this work, a mixture StI-StII was obtained (yield >95%, with an increase in specific activity: 14 times) from the animal extract using an oxidized phospholipid-based affinity chromatographic matrix binding phospholipases. Cytolysin identification in the mixture was performed by immunoblotting and N-terminal sequence analyses. Phospholipase A2 (PLA2) activity of StI-StII was relatively high (1.85U/mg) and dependent of Ca(2+). The activity resulted optimum when was measured with the mostly unsaturated soybean phosphatidylcholine (PC), when compared to the less unsaturated egg PC or completely saturated dipalmitoyl PC, in the presence of 40mM Ca(2+) at pH 8.0. This Ca(2+) concentration did not exert any effect on binding of StI-StII with soybean PC monolayers. Then, PLA2 activity seems not be required to binding to membranes.

LPS inmobilization on porous and non-porous supports as an approach for the isolation of anti-LPS host-defense peptides.

Lipopolysaccharides (LPSs) are the major molecular component of the outer membrane of Gram-negative bacteria. This molecule is recognized as a sign of bacterial infection, responsible for the development of local inflammatory response and, in extreme cases, septic shock. Unfortunately, despite substantial advances in the pathophysiology of sepsis, there is no efficacious therapy against this syndrome yet. As a consequence, septic shock syndrome continues to increase, reaching mortality rates over 50% in some cases. Even though many preclinical studies and clinical trials have been conducted, there is no Food and Drug Administration-approved drug yet that interacts directly against LPS. Cationic host-defense peptides (HDPs) could be an alternative solution since they possess both antimicrobial and antiseptic properties. HDPs are small, positively charged peptides which are evolutionarily conserved components of the innate immune response. In fact, binding to diverse chemotypes of LPS and inhibition of LPS-induced pro-inflammatory cytokines from macrophages have been demonstrated for different HDPs. Curiously, none of them have been isolated by their affinity to LPS. A diversity of supports could be useful for such biological interaction and suitable for isolating HDPs that recognize LPS. This approach could expand the rational search for anti-LPS HDPs.

Rational design of immobilized lipases and phospholipases.

Immobilization of lipases and phospholipases on, mainly, water insoluble carriers, helps in their economic reuse and in the development of continuous bioprocesses. Design of efficient lipases and phospholipases-immobilized system is rather a difficult task. A lot of research work has been done in order to optimize immobilization techniques and procedures and to develop an efficient immobilized system. A new rational design of immobilized derivatives strategy (RDID) has been conceived in favor of the successful synthesis of optimal lipases and phospholipases-immobilized derivatives, aiming prediction of the immobilized derivative's functionality and the optimization of load studies. RDID begins with the knowledge of structural and functional features of synthesis components (protein and carrier), and the practical goal of immobilized product. RDID was implemented in software named RDID ( 1.0 ). The employment of RDID allows selecting the most appropriate way to prepare immobilized derivatives more efficient in enzymatic bioconversion processes and racemic mixture resolution.

Las lipasas: enzimas con potencial para el desarrollo de biocatalizadores inmovilizados por adsorción interfacial: [revisión] / Lipases: enzymes having the potential for developing immobilised biocatalysts by interfacial adsorption: [review]

Las lipasas son enzimas con propiedades funcionales muy interesantes que permiten su utilización práctica en diversos campos de las industrias agroquímica, farmacéutica, de detergentes y alimentaria, así como en química fina. Entre las aplicaciones más importantes de estas moléculas se encuentran: la resolución de mezclas racémicas, la obtención de compuestos ópticamente puros y la bioconversión de principios activos. En este trabajo se presenta una amplia revisión del tema, que abarca desde aspectos estructurales y funcionales de las lipasas, hasta la inmovilización de estas enzimas mediante adsorción interfacial y su empleo en biotecnología.

Lipases are enzymes with very interesting functional properties that allow their practical use in different fields of Agro-Chemical, Pharmaceutical and Food industries, as well as in Fine Chemistry. Among the most relevant applications of these molecules are: racemic mixtures resolution, obtainment of optically pure compounds and bioconversion of active principles. In this work a broad review of this topic is presented. This includes since structural and functional features of lipases until the immobilization of these enzymes by interfacial adsorption and their employment in biotechnology.

Extraction systems for isolating esterases having interfacial adsorption / Sistemas de extracción para el aislamiento de esterasas con adsorción interfacial

En el presente trabajo se optimizaron las condiciones de extracción de esterasas con actividad en interfaces, a partir de la anémona marina Stichodactyla helianthus y del camarón peneido Litopenaeus vannamei Las esterasas interfaciales, cuya presencia en estas especies había sido informada previamente, presentan características funcionales que las hacen muy atractivas para su empleo industrial. Los homogenados de los animales se trataron con los detergentes Tritón X-100, Tween 20 y Tween 80 en dos concentraciones cada uno: la Concentración Micelar Crítica (CMC) y la mitad de ésta. Además se empleó NaCl 0,5 mol/L y n-butanol a las proporciones 5, 10 y 20%. Cada variante fue comparada con el método tradicional de extracción con agua destilada, que fue tomado como control. Los mejores resultados se obtuvieron empleando n-butanol al 20%, para recuperar las actividades esterasa y fosfolipasa, y al 10%, en el aislamiento de la actividad lipasa. La efectividad de este solvente en el aislamiento de estas enzimas con afinidad por las interfaces lípido/agua, pudiera estar dada por su capacidad para romper los agregados entre estas moléculas y causar la desorción de las mismas a los restos de membrana y tejidos presentes en la preparación.

Interfacial esterases present great functional versatility, making them very attractive molecules for industrial applications. The conditions for extracting interfacial esterases previously detected in the sea anemone Stichodactyla helianthus and the shrimp Litopenaeus vannamei were optimised in this work. Animal homogenates were treated with Triton X-100, Tween 20 and Tween 80 detergents at two different concentrations: critical micellar concentration (CMC) and half of that concentration; 0.5 mol/L NaCl and n-butanol at 5%, 10% and 20% v/v ratios were also tested. Each procedure was compared to the control extraction method using distilled water. The best results were obtained with 20% n-butanol for recovering esterase and phospholipase activity whilst 10% n-butanol extraction was the most effective for lipase activity isolation. This solvent’s suitability for isolating interface-activated enzymes could be explained by its ability to dissociate biomolecule aggregates and cause enzyme desorption from the membranes and tissues remaining in the preparation.